Search
MS Student
The Institute is committed to develop the following practical and advanced technologies: (1) the vision system, (2) the intelligent systems and control technology. As automation technology is an integrated technology, the current source of students in this master's program from the major science and engineering departments of the universities. There are seven full-time teachers now. Each full-time teacher has adequate academic training, sufficient research energy, and has repeatedly obtained excellent appraisals and awards from our schools, the Ministry of Science and Technology and the Ministry of Education etc. Therefore, the teaching, research and educational equipment are all sufficient to fully meet the aforementioned development goals.
Graduation & Course Policy |
Within a maximum of 4 years since entering the MS program, an MS student must complete at least 24 graduate credit hours and submit a thesis to the examining committee consisting of at least three members. Upon the successful completion of the oral examination conducted by the examining committee, a Master of Science degree is awarded to the student. Depending on academic performance, a limited number of selective MS students may apply for direct admission to the Ph.D. program of CMEE.
The College of Mehanical and Electrical Engineering (CMEE) offers international doctoral program for international students.
International Admission |
Perspective students need to finish Eligibility Check and complete online application through Online Application System for International Degree Students, and submit the application form via post to Taipei Tech.
Admission Flowchart
To see detailed application procedure of admission, please refer to Admission Handbook and the website of Office of International Affairs.
Course Description - Graduate Institute of Automation Technology |
|
Course Code |
Course Name |
Credits |
Hours |
|---|---|---|---|
6102065 |
Research Topics in Smart Living Technologies |
3.0 |
3 |
6105001 |
Thesis |
6.0 |
6 |
6105002 |
Seminar |
2.0 |
4 |
6105003 |
The Software of Mechanical Design Automation |
3.0 |
3 |
6105004 |
The Software of Electrical Design Automation |
3.0 |
3 |
6105005 |
Introduction to Automatic System |
3.0 |
3 |
6105006 |
Man-Machine System |
3.0 |
3 |
6105007 |
System Dynamic Modeling and Simulation |
3.0 |
3 |
6105008 |
Artificial Intelligence and Expert System |
3.0 |
3 |
6105009 |
Computer Algorithms |
3.0 |
3 |
6105010 |
E-commerce |
3.0 |
3 |
6105011 |
Advanced Computer-aided Design |
3.0 |
3 |
6105012 |
Computer Aided Engineering Analysis |
3.0 |
3 |
6105013 |
Computer Aided Engineering Test |
3.0 |
3 |
6105014 |
Grey System |
3.0 |
3 |
6105015 |
Principle for Automation Management |
3.0 |
3 |
6105016 |
Concurrent Engineering |
3.0 |
3 |
6105017 |
Robot Analysis and Design |
3.0 |
3 |
6105018 |
Advanced Computer-aided Mechanism Analysis |
3.0 |
3 |
6105019 |
Engineering Optimization Methods and Applications |
3.0 |
3 |
6105020 |
Quality Control and Rrliability Engineering |
3.0 |
3 |
6105021 |
Design of Automatic Machinery |
3.0 |
3 |
6105022 |
Fuzzy Control |
3.0 |
3 |
6105023 |
Neural Network |
3.0 |
3 |
6105024 |
Design for Virtual Reality |
3.0 |
3 |
6105025 |
Design of Solid Models |
3.0 |
3 |
6105026 |
Pattern Recognition Technology |
3.0 |
3 |
6105027 |
Computer Aided Heat Flow Analysis |
3.0 |
3 |
6105028 |
Integrated Database for Automatic Operation Line |
3.0 |
3 |
6105029 |
Clean Room Design |
3.0 |
3 |
6105030 |
Computer-Aided Integrated Circuit Design |
3.0 |
3 |
6105031 |
Automatic Optical Metrology and Experiment |
3.0 |
3 |
6105032 |
3D Reverse Engineering & Techniques |
3.0 |
3 |
6105033 |
Advanced Precision Metrology |
3.0 |
3 |
6105034 |
Special topics on designing SCADA Systems |
3.0 |
3 |
6105035 |
Genetic Algorithms |
3.0 |
3 |
6105036 |
Mechatronics in Medicine |
3.0 |
3 |
6105037 |
Rehabilitation Technology |
3.0 |
3 |
6105038 |
Applied Technology of Digital Signal Processor |
3.0 |
3 |
6105039 |
Digital Control System |
3.0 |
3 |
6105040 |
Computerized Motion Control |
3.0 |
3 |
6105041 |
Object-oriented Programming and its applications |
3.0 |
3 |
6105042 |
Real-time Control System |
3.0 |
3 |
6105043 |
Introduction to Embedded System Design |
3.0 |
3 |
6105044 |
Embedded System Design and Application |
3.0 |
3 |
6105045 |
Computer Network |
3.0 |
3 |
6105046 |
Special Topics in HDL |
3.0 |
3 |
6105047 |
Design of Micro-Controller systems |
3.0 |
3 |
6105048 |
Technology Innovation Practice |
3.0 |
3 |
6105049 |
Micro-and Nano-measurement System and Technuques |
3.0 |
3 |
6105050 |
Advanced Microprocessor System Design |
3.0 |
3 |
6105051 |
Design and Manufacturing Technology of Flat Panel Display |
3.0 |
3 |
6105052 |
The Development and Application of Embedded MultitaskingReal-time Kernel |
3.0 |
3 |
6105053 |
The Design Theory and Application of RFID |
3.0 |
3 |
6105054 |
Soft Computing |
3.0 |
3 |
6105055 |
Digital Image Processing |
3.0 |
3 |
6105056 |
Grey MADM Analysis |
3.0 |
3 |
6105057 |
Machine Vision and Image Processing Algorithm |
3.0 |
3 |
6105058 |
Adaptive Fuzzy Neural Control |
3.0 |
3 |
6105059 |
Artificial Intelligence |
3.0 |
3 |
6105060 |
The Advantage Engineering Mathematica |
3.0 |
3 |
6105061 |
Machine Learning |
3.0 |
3 |
6105062 |
Special Topics on T-S Fuzzy Model |
3.0 |
3 |
6105063 |
Advanced Linear System |
3.0 |
3 |
6105064 |
Nonlinear Control |
3.0 |
3 |
6105065 |
Research Topics in Smart Living Technologies |
3.0 |
3 |
6105066 |
Robust Control |
3.0 |
3 |
6105067 |
Advanced T-S Fuzzy System |
3.0 |
3 |
6105068 |
Introduction to Optimization |
3.0 |
3 |
6105069 |
Special Topic in T-S fuzzy control |
3.0 |
3 |
6105070 |
Optimal Control |
3.0 |
3 |
6105071 |
Application and design of engineering software |
3.0 |
3 |
6105072 |
Graduate On-Site Research |
3.0 |
18 |
6105073 |
Special Topics on Automatic Technology（I） |
1.0 |
1 |
6105074 |
Special Topics on Automatic Technology（II） |
2.0 |
2 |
6105075 |
Special Topics on Automatic Technology（III） |
3.0 |
3 |
6105076 |
Experiments and Design for Automatic Systems |
3.0 |
3 |
6105077 |
Digital Instrument Control |
3.0 |
3 |
6105078 |
Applied Technology of the Internet of Things |
3.0 |
3 |
6105079 |
Technical English Writing |
3.0 |
3 |
6105080 |
Intelligent Control |
3.0 |
3 |
6105081 |
Industrial Networks |
3.0 |
3 |
6105082 |
Branded Company's Integrated Product Development |
3.0 |
3 |
6105083 |
Data Analysis and Processing |
3.0 |
3 |
6105084 |
Modern Control Theory |
3.0 |
3 |
6105085 |
Evolutionary Computing |
3.0 |
3 |